| Home | Careers | Contact Us | Newsletter | Store |
 |
      |
 |
 |
           |
|
Cray Chippewa Falls Directions
1050 Lowater Road, Chippewa Falls, WI 54729 Cray's Chippewa Falls facilities are located in "The Hill" Industrial Park. When you reach Lowater Road, the first few entrances on the left are Cray Inc. First entrance: Cray training is in the Development building at 900 Lowater Rd. Second entrance then on the right: The main Cray reception desk is in the Engineering building at 1050 Lowater Rd. Second entrance: Cray Conference Center is the smaller white building between Development and Engineering.
From Chippewa Valley Regional Airport in Eau Claire Turn left to exit the airport parking lot, and follow Melby Street to Highway 53/124 North. Turn left and follow 124 North into Chippewa Falls. Turn right onto Highway 178. Follow the Highway 178 road signs (multiple curves) over the overpass to the traffic lights at the intersection of 178 and County "I"; turn left at the lights. Take the first right turn onto Lowater Road; the Industrial Park buildings are just ahead and on the left. From Minneapolis-St. Paul Airport/Highway 29 Allow approximately 1 3/4 hours travel time from the airport to Chippewa Falls. Follow signs to I-494 East and go approximately 22 miles to I-94. Go East on I-94 (towards Madison) approximately 60 miles to WI-Hwy 29/exit 52. Go East on WI-Hwy 29 (towards Green Bay) approximately 25 miles to Seymour Cray Sr. Blvd/exit 79. Turn right at traffic signal at the end of the exit ramp. Follow Seymour Cray Sr. Blvd approximately 3 miles. Turn left/west onto Highway "I"; cross through the traffic signal at Highway 178. Take the first right turn onto Lowater Road; the Industrial Park buildings are just ahead and on the left. |
|
|
|||||
 |
|||||
|